Aastra RFP 32 WLAN
      The Internet's Premier Resource for Aastra SIP DECT

  Aastra RFP 32 WLAN


Aastra RFP 32 WLAN, VoIP, Asterisk Trixbox

$533.99 USD  |   Add to Cart  |   View Cart  


The DECToverIP base station for wireless communication in IP networks

Aastra-DeTeWe presents the complete integration of wireless DECT telephony in an IP infrastructure. The Radio Fixed Parts RFP 32 IP and RFP 34 IP are connected directly to the LAN like a VoIP device and use the benefits of established DECT technology for radio transmission. This ensures full compatibility with cordless DECT terminals, which are available as system telephones and standard GAP terminals.

The VoIP solution is particularly suitable for branch offices that are connected to a company’s headquarters via IP routes. The integrated mobile handsets act as normal company extensions, which means that staff can always be reached on their telephone number, regardless of whether they are currently in headquarters or one of the branch offices. Using shared IP connections for data and telephony cuts down on the need for extra infrastructure and therefore reduces costs.

The RFP 32 IP is the indoor version and the RFP 34 IP is the outdoor version.

Aastra SIP DECT Features: RFP 32
Features RFP 32 IP and RFP 34 IP DECT
  • All 120 DECT channels supported for maximum use of DECT capacity
  • 8 simultaneous voice channels per  DECT IP base station, 4 additional channels for handover
  • GAP  standard supported
  • Connection handover in line with the GAP standard
  • DSAA authentication between base and handset
  • Cordless system telephones can use all features offered by the OpenCom 100 or 1000
  • Integrated DECT antenna in RFP 32 IP
  • External dipole or directional antenna on the RFP 34 IP

Service and Installation

  • 3 LED‘s signalling the current operating state: on RFP 32 IP outside, on RFP 34 IP inside
  • Central configuration via WEB-Configurator
  • Central system journal
  • Central cluster administration
  • Whirring alternatively from below (cable duct) or from above (suspended ceiling) for RFP 32 IP
  • RFP 34 IP can be connected via RJ 45 or IDC (insulation displacement contact) connectors


  • VoIP connection using RTP/RTCP protocol
  • G.711/G.723.1/G.729AB codec (additional license required) depending on required voice quality and available bandwidth
  • Quality of service supported by Diffserv/ToS Flag
  • Adaptive jitter compensation
  • Echo cancellation/suppression
  • Voice activity detection and comfort noise generator


  • Connection via Ethernet 100 Base T
  • Power supply in line with Power over LAN™ standard IEEE 802.3af, class 0
  • IPv4
  • Optional SNMPv1/v2c, MIB II, read only, support of traps


  • DHCP
  • TFTP







 Copyright 2006 by digiumcards.com. All rights reserved. Powered by .e4LLC. Traverse City MI, USA